Electrical Vertical Grinder Mixer Model VGM-500,1000 & 2000


Product HS code for import custom use: 84361000


Introduction and Description

VGM series of Feed processing machine is a Vertical type grinder mixer, which is commonly used in feed, food, pharmaceutical, chemical, paint and other industries for making powder materials in size 40mesh and up. It is consist of a hammer crushing system, a mixer and a feeding system.

Technical Data

Model VGM-500 VGM-1000 VGM-2000
Processing quantity 1 batch / hour 1 batch / hour 1 batch / hour
Max. processing capacity 500 kgs / batch 1000 kgs / batch 2000 kgs / batch
Time for batch processing (for chicken feed) 1 hour (starting from raw materials feeding in till the processed feed comes out)
Power supply 380 V
Central control Electricity box Including breaker and step-down starting device
Spindle speed of Grinder 3000 rpm
Hammer grinder power 7.5 kw 11 kw 15 kw
Mixer power 2.2 kw 2.2 kw 2.2 kw × 2
Auto.feeder (screw lifter) power 2.2 kw
Auto. Feeder Size Dia.140 mm ; 2500 mm length
Hammer piece quantity #40; 16 pcs #50; 20 pcs #60; 24 pcs
Crushed particle size 0.8~12 mm
Sieve description 130×1510 mm 140×1710 mm 140×1710 mm
Spindle speed of Mixer 400 rpm
Mixing uniformity Min. 95%
Machine main material Steel board, in thickness 1.5mm
Machine weight 370 kgs 440 kgs 600 kgs
Machine size 3200×1900×1200 mm 3700×2200×1400 mm 3700×3700×2700 mm

Sketches

CTE-400 A. Tank body
B. Blender
C. Auger leaves
D. Mixing materials entrance
E. Transferring leaves
F. Bearing chamber
G. Belt pulley

Single helical ribbon auger inside Auto. feeder

Steel Sieves in different size; Using life: 1 year

Grinder hammer piece: 12pcs/set

Processing procedure:

  1. The raw material goes into the grinder tank throught the Screw lifter.
  2. Grinded material goes into the bottom part of the Mixing tank.
  3. Additive can be added throught the hopper feeder.
  4. By the single helical ribbon auger inside the Mixing tank, the grinded materials together with the additives can be lifted into the mixing tank for mixing programme.

Features:

  1. Made by strong steel sheet in fine workmanship, good sealing technique, without powder leakage.
  2. Grounded grinder reduces a lot the machine shaking and to enable a more efficiency of raw materials feeding in.
  3. Equippd with China top 10 electric motor with 100% copper wire.

Installation:

  1. The workshop flooring foundation should be solid, flat and plain and strong enough.
  2. Make sure that all the fasteners are well stated in safe and strong position, all the moving parts are rotating flexible and in smooth operation.
  3. All the motors and reducer are regularly greased following to the using guidance.
  4. After installation, please make sure that all components are set up properly, especially the Motor direction, a wrong Motor direction will cause big problem.

Usage:

  1. Each time before exact start of grinding and mixing, please make the machine in empty running to make sure that every part of the machine are in good conditions.
  2. Metal piece, stone piece or any other hard materials are not allowed to mix in the grinding materials or mixing materials, otherwise the machine components will be destroyed.
  3. Please always start the mixer when the tank body is 80% full or at least the materials level is higher than the mixer spindle.
  4. Any hand touching or wooden/metal stick moving inside the Materials entrances or Tank body is FORBIDDEN.

Maintenance:

  1. Machine bearings are requested to be cleaned and greased after using 60 days. We suggest you to choose Kea grease ZG-3.
  2. Gearbox requests a grease replacement after using 15 days, then you need to replace again every 60 to 90 days after continue working.